Sterimixer® The Original Magnetic Coupled Mixer for Pharmaceuticals
STERIMIXER攪拌器使用磁力耦合技術，目前已廣泛運用於生技製藥產業，包含攪拌葉片、軸承、驅動馬達、焊接板等，所有跟產品接觸零件與焊接板均由AISI 316L不鏽鋼製作
- Effective mixing
- Mixing to the Last Drop
- CIP/SIP Design
- Removable drive-units
- Bottom Mounted
- Prevents sedimentation
- Interchangeable Impellers
- Low shear Design
- Autoclavable
- Variable Speed
- High Performance
- Reduces foaming
- For vessels from 5 liters - 30.000 liters
- Fully CIP/SIP Clean In Place / Steam In Place.
- Full containment
- No Need for Baffles
SMA攪拌葉片(自潔式設計)
SMA攪拌葉片上孔洞可讓液體水平流動，運轉中液體流動經過攪拌葉片內部軸承由底部排出，SMA系統適用於無菌清潔，針對全自動 CIP 清洗專利設計之攪拌葉片SMA浸入清潔液體中，於CIP過程中SMA攪拌器開啟運轉執行清洗。
SMO攪拌葉片(開放式設計)
SMO攪拌葉片內部開放式設計，當使用槽內清潔設備時開放式設計方便於清潔，例如使用固定型噴灑頭對準SMO攪拌葉片清潔攪拌器內部，SMO攪拌葉片在執行CIP清潔時無須浸入於清潔液體，SMO系統適用於食品衛生級清潔。
SMMS高剪切力攪拌葉片
SMMS為需要摻入輕質或疏水性粉末的應用提供了更高的剪切力。 葉輪也是一種開放式設計，在清潔過程中無需將其浸沒。
Bearings
The bearing assembly consists of male and female bushings. It provides a rotating surface for the impeller. The CIP design of the impeller ensures that the bearing is effectively cleaned during CIP/SIP.
The journal bearing design minimizes rotating elements and contact surfaces, therefore limiting particle generation. This proven design provides a flat rotating surface that combined with the design of the magnetic coupling ensures rotational stability.
The bearings can be provided in different materials, such as tungsten carbide or silicon carbide. Material selection is based on compatibility with the process fluids.
Flexible Platform
The weld plate is welded onto the tank bottom and is made out of AISI 316L stainless steel. Comparable SMA and SMO models fit into the same weld plate and bearing, making it easy to exchange impeller types. Additionally, in most weld plate sizes, more than one size mixer can be installed, providing a flexible platform.
Radial Design for Strong Magnetic Coupling
The magnetic coupling design is radial, which creates a very strong magnetic coupling. This allows Sterimixer to work with products with viscosities up to 1,000 cP.
The design of the magnetic coupling is key to a proper operation of the mixer unit, in particular of the bearing assembly. The Sterimixer coupling does not create any additional forces to the bearing while the impeller rotates.
Drive Units
The drive unit is the driving mechanism of the mixer. It consists of the magnet rotor, gearbox and motor.
Options
Drive Units are offered in different types, such as AC, DC, Stainless Steel, Explosion Proof and AIR. The angled gearbox reduces the space requirement. Some models are equipped with bayonet coupling that facilitates installation/removal of the drive unit. Extended gearbox shaft is available for vessels with jackets.
Lowering device
The magnet lowering device allows the user to break the magnetic coupling and remove the impeller inside the vessel without having to remove the drive unit from the vessel. This reduces service time considerably and it is particularly useful when working with heavy drive units. This device is available in most size mixers and existing drive units can be retrofitted to have it installed.
Impeller Monitor Sensor
The Impeller Monitor Sensor directly measures impeller rpm by counting the magnets revolutions.
Control System
Consisting of a variable frequency drive, allows to control the agitator speed. Provided in different enclosures. Std. Unit, as shown, has a IP65 (NEMA 4x) enclosure Options: Speed sensor system for reading rpm of impeller.
Control Box Mark III with touch screen: This option includes a touch screen HMI/controller that allows for easy control of the mixer speed and displays both measured rpm and set rpm. Up/down arrows allow operator to increase/decrease mixer speed. All programming is accessed through the HMI.
更多產品資訊與規格，請洽免費服務專線0800-588990。 Free!!
或 線上留言 我們將有專員與您連絡，謝謝!!